What it approves
Installation of Control Products Corporation Night Vision Imaging System (NVIS) Lighting System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2(10-68) Page 1 of 3 O:\STCsforOKC\SR09410RC Reissue 1.DOC JLK ASW-170 Number SR09410RC This certificate issued to Control Products Corp.
1513 W. Jefferson St.
Grand Prairie, TX 75051
Part 27 of the Federal Aviation Regulations.
Original Product -- Type Certificate Number : H2SW Bell Helicopter Textron Canada Make :
407 Model :
Description of Type Design Change: Installation of Control Products Corporation Night Vision Imaging System (NVIS) Lighting System in accordance with Control Products Corporation Master Drawing List MDL-407-001, Revision A, dated May 4, 2004, or later FAA approved revision(s).
Limitations and Conditions: This STC is for the Bell 407 only and is not to be used as the basis for follow on approvals for other models. Installation of this Night Vision Imaging System (NVIS) does not include or imply approval for flight operation with night vision goggles (NVGs).
The operator must receive approval from their FAA operational authority to operate (See continuation sheet 3 of 3)
Date of application : November 15, 2001
Date of issuance : June 07, 2004 Date reissued : January 10, 2008
( Signature) Lance T. Gant, Manager Rotorcraft Certification Office Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SR09410RC Date of Issuance: June 07, 2004
with NVGs. Any deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the compatibility of NVIS and may require a re-evaluation for NVG compatibility by the FAA Aircraft Certification Office (ACO). Once the aircraft is modified with this STC any future modification to the aircraft may also affect the compatibility of NVIS and may require a re-evaluation for NVG compatibility by the FAA ACO.
Rotorcraft Flight Manual Supplement (RFMS), dated June 7, 2004, or later FAA approved RFMS is required. Instructions for Continued Airworthiness, Control Products Corporation. Document ICA- 407-001, Revision A, dated May 3, 2004, or later FAA accepted revision, is required for this installation.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron (Canada) | 407 | H2SW |