STC SR09414RC

N umber SR09414RC This certificate issued to

Part 29 of the F ederal A viation R egulations. See continuation sheet 3 of 3 for additional requirements.

Original Product – Type Certificate N umber :

Installation of Caution Advisory Panel in accordance with Heritage Aviation, LTD., Master Drawing List R00-12001, Revision IR, dated July 13, 2004, or later Federal Aviation Administration (FAA) approved revision(s).

Limitations and Conditions: Rotorcraft Flight Manual Supplement (RFMS) R09-62001, Revision IR, dated July 26, 2004, or later FAA approved RFMS is required. Instructions for Continued Airworthiness, Heritage Aviation, LTD., Document R08-72001, Revision IR, dated July 21, 2004, or later FAA accepted revision is required for this installation.

Erickson Air-Crane Incorporated 3100 Willow Springs Road Central Point, OR 97502-9362 H6EA M ake : Erickson M odel : S-64F

B y direction of the A dministrator

(Signature) Carl F. Mittag, Manager Rotorcraft Certification Office Southwest Region

(Title)

Date of application : December 17, 2003 Date of issuance : July 27, 2004

FAA Form 8110-2-1(10-69) Page 2 of 3

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SR09414RC Date of Issuance: July 27, 2004

Certification Basis of this change is as follows:

FAR Part 29, dated February 1, 1965, including Amendment 29-1 and 29-2, except section

29.855(d) and Special Condition No 29-6-EA-2, also compliance has been found specifically to sections;

29.1305(a)(4), (a)(6), and (a)(9) Amendment 29-3

29.1322(a)-(c) at Amendment 29-12

29.1353(a)-(b) at Amendment 29-15

29.1321(f)-(g) at Amendment 29-21

29.771(a)-(c), 29.1355, 29.1357(a), (c), (d), and (e), 29.1583(e) at Amendment 29-24

29.1529 at Amendment 29-20, and Appendix A to Part 29, Sections A29.1, A29.2, and A29.3 at Amendment 29-27

29.1309(a), (b)(1), (c) and (g) at Amendment 29-40

29.1359(b)-(c) at Amendment 29-42

Compatibility of this design with previously approved modifications must be determined by the installer.

Installation of STCs SR09411RC, SR09412RC, SR09413RC, SR09415RC, and SR09416RC is required.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.