STC SR09438RC

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title 3 STC # SR09438RC Aero Dynamix, Inc.

3227 W. Euless Blvd.

Euless, TX 76040 Federal Aviation Regulations 27 Installation of Night Vision Goggle (NVG) Compatible Lighting System in accordance with Aero Dynamix, Inc., Master Drawing List (MDL) Document No. MDL 1959-01, Rev. J, dated August 27, 2015, or later Federal Aviation Administration (FAA) approved revision. Rotorcraft Flight Manual Supplement (RFMS), Aero Dynamix, Inc. Document No. RFMS A109-01, Rev. C, dated September 30, 2015 or later FAA approved revision is required.

(See continuation Sheet 3 of 3) Installation of NVG compatible interior lighting system does not include or imply approval for flight operations with NVGs. The operator must receive a determination from their civil aviation authority if an approval to operate with NVGs is required. Any subsequent deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the compatibility of the NVIS and will require a re-evaluation for NVIS cockpit and NVG compatibility.

(See continuation Sheet 3 of 3) Scott A. Horn Manager, Fort Worth Aircraft Certification Office Southwest Region AgustaWestland S.p.A.

A109E, A109S September 14, 2015 February 11, 2005 May 10, 2005 P/N: SA03554RC-R H7EU

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 STC #SR09438RC

FAA Form 8110-2 (5/14) Page 3 of

3 Date of Issuance: May 10, 2005 Amended Date: September 30, 2015

Description of Type Design Change (Continued):

Instructions for Continued Airworthiness (ICA), Aero Dynmaix, Inc. Document No. ICA A109-01, Rev. J, dated August 25, 2015 or later FAA accepted revision is required for this installation.

The aircraft is not certificated for NVG operations until the evaluation is completed. Once the aircraft is modified with this STC, any future modification to the aircraft may also affect the compatibility with NVG and may require a re-evaluation by the FAA Aircraft Certification Office. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

-END-

***Please delete this line and following file location reference when preparing the original copy*** APG:O:\WP\STC\Aero Dynamix STC Docs\ADI, STC SR09439RC, A109E, A109S (Amended 09.30.2015).pdf SR09438RC