STC SR09442RC

SR09442RC HELIFAB East, LLC 602 Sevier St. Unit 300 Johnson City, TN 37604-7561 Part 6 the Civil Air Regulations H2SW Bell Helicopter Textron Canada 206L-1; 206L-3; 206L-4 Equipment Mount installations, assemblies and parts in accordance with Helifab, Inc. Drawing List HF-206-DL-101, Revision F, dated November 01, 2010, or later FAA approved revisions. For installation of MRL Mount kit the following drawing is required: Helifab, Inc. drawing HF-206-EMS-3000, Revision C, dated November 01, 2010, or later FAA approved revisions.

(See continuation sheet 3 of 3) February 25, 2005 July 1, 2021 August 19, 2005 February 15, 2011 Jim Grigg Manager, Fort Worth ACO Branch, Compliance & Airworthiness Division Aircraft Certification Service 3

SR09442RC 3

SR09442RC Date of Issuance: August 19, 2005 Date Amended: February 15, 2011 Date of Reissuance: July 1, 2021

HF-206-EMS-3000-1 & -2, installations of the MRL Mount is limited to use with Medical Research Laboratories Inc., part number 971013E MRL Unit and part number 981114 MRL Charger Base. Power source limited to internal battery only.

HF-206-EMS-3000-3 & -4, installations define MRL mounting plate weight and geometry limitations and require further FAA approval for any installed equipment.

Instructions for Continued Airworthiness, Helifab, Inc., Report No. HF-206-ICA-MFL Mount-1, Revision B, dated December 21, 2010, or later FAA accepted revision is required for this installation. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

-END- 3 3