STC SR09454RC

Part 6 of the Civil Air R egulations.

Original Product --Type Certificate N umber :

Installation approval of a new engine mount assembly and lateral cyclic control support assembly in accordance with Texas Helicopter Company, Inc. MDL THC-2003-111, Rev. E, dated 01/26/06 or later FAA approved revision. Instructions for Continued Airworthiness, Texas Helicopter Company, Inc. document number THC-2003-112, Revision A, dated 1/26/06 or later FAA accepted revision is required.

1. Instructions for Continued Airworthiness, Texas Helicopter Company, Inc. document number THC-2003-112, Revision A, dated 1/26/06 or later FAA accepted revision is required.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise esta blished by the A dministrator of the F ederal A viation A dministration.

Scott’s-Bell 47, Inc.

100 Minnesota Avenue Le Sueur, MN 56058

H-1 M ake : Bell Helicopter Textron M odel : 47D-1 and 47G Date of application : May 5, 2003

Date of issuance : February 10, 2006 Date reissued : December 15, 2010; August 7, 2014

B y direction of the A dministrator

Original Signed By:

Karol Mordasiewicz (Signature) Karol Mordasiewicz Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office

(Title)

FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES

N umber SR09454RC