What it approves
Installation of Night Vision Goggle Compatible Interior Lighting System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 29 of the F ederal A viation R egulations.
Original Product -- Type Certificate N umber :
Description of Type Design Change: Installation of Night Vision Goggle Compatible Interior Lighting System in accordance with REB Technologies, Inc., Master Drawing List 98020412MDL, Rev IR, dated January 23, 2006, or later Federal Aviation Administration (FAA) approved revision. Rotorcraft Flight Manual Supplement RFMS Revision IR, dated April 12, 2006, or later FAA approved RFMS is required. Instructions for Continued Airworthiness, REB Technologies, Inc., Document No. 98020412ICA, Rev A, dated April 11, 2006, or later FAA accepted revision is required for this installation
Limitations and Conditions: Installation of Infrared Filtering Cockpit Lighting does not include or imply approval for flight operations with NVG. The operator must receive approval from their Civil Aviation operational authority to operate with NVG. Any deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the (See continuation sheet 3 of 3)
REB Technologies, Inc.
530 Bedford Road, Suite No. 102 Bedford, Texas 76022-6554 H4SW M ake: Bell Helicopter Textron M odel : 212, 412, 412EP, 412CF
Date of application : January 16, 2006
Date of issuance : April 12, 2006
B y direction of the A dministrator
(Signature) Carl F. Mittag, Manager Rotorcraft Certification Office Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SR09458RC Date of Issuance: April 12, 2006
compatibility with NVG and may require a re-evaluation by the FAA Aircraft Certification Office (ACO). Once the aircraft is modified with this STC, any future modification to the aircraft may also affect the compatibility with NVG and may require a re-evaluation by the FAA ACO. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.