STC SR09459RC

Number SR09459RC

This certificate issued to: REB Technologies, Inc.

1500 Brown Trail Bedford, TX 76022

Part 27 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: H9EU

Make: Airbus Helicopters Model: AS350B3 Description of Type Design Change:

Installation of Night Vision Goggle (NVG) Compatible Interior Lighting System in accordance with REB Technologies, Inc., Master Drawing List (MDL) Document No. 98023503MDL, Rev. N, dated January 3, 2014, or later Federal Aviation Administration (FAA) approved revision. Rotorcraft Flight Manual Supplement (RFMS), REB Technologies, Inc. Document No. 98023503FMS, Rev. A, dated March 15, 2008, or later FAA approved revision is required.

Installation of NVG compatible interior lighting system does not include or imply approval for flight operations with NVGs. The operator must receive a determination from their civil aviation authority if an approval to operate with NVGs is required. Any subsequent deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the compatibility of

Date of application: September 23, 2005 Date reissued: July 21, 2014 Date of issuance: May 26, 2006 Date amended:

Signature Scott A. Horn Title Manager, Rotorcraft Certification Office, Southwest Region

FAA Form 8110-2 (8/13) Page 1 P/N: N/A PE: APG OFFICE: ASW-170

Number: SR09459RC Date of Issuance: May 26, 2006 Reissuance Date: July 21, 2014

Description of Type Design Change (Continued):

Instructions for Continued Airworthiness (ICA), REB Technologies, Inc. Document No. 98023503ICA, Rev. B, dated August 28, 2012, or later FAA approved revision is required.

the NVIS and will require a re-evaluation for NVIS cockpit and NVG compatibility. The aircraft is not certificated for NVG operations until the evaluation is completed. Once the aircraft is modified with this STC, any future modification to the aircraft may also affect the compatibility with NVG and may require a re-evaluation by the FAA Aircraft Certification Office. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

-END-

FAA Form 8110-2 (8/13) Page 3

SUPPLEMENTAL TYPE CERTIFICATE, FAA FORM 8110-2 (CONTINUED)

To (Name of transferee)

(Address of transferee)

(Number and street)

(City, State, and ZIP Code)

From (Name of grantor)

(Address of grantor)

(Number and street)

(City, State, and ZIP Code)

FAA Form 8110-2 (8/13) Page 2