What it approves
Installation of Night Vision Imaging System (NVIS) / Night Vision Goggles (NVG) Cockpit Lighting.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SR09480RC This certificate issued to
Part 27 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of Night Vision Imaging System (NVIS) / Night Vision Goggles (NVG) Cockpit Lighting in accordance with Aero Dynamix, Inc., Master Drawing List MDL 1775-01, Revision A, dated May 18, 2007, or later Federal Aviation Administration (FAA) approved revision(s). Rotorcraft Flight Manual Supplement, RFMS, MD900-01, Revision IR, dated May 31, 2007, or later FAA approved (See continuation sheet 3 of 3)
Limitations and Conditions: Installation of NVIS / NVG Cockpit Lighting does not include or imply approval for flight operations with Night Vision Goggles (NVG). The operator must receive approval from the Civil Aviation operational authority to operate with NVG. Any deviation to the cockpit/cabin configuration specified in the type design (See continuation sheet 3 of 3)
Aero Dynamix, Inc.
3227 W. Euless Blvd.
Suite 100 Euless, TX 76040 H19NM Make : MD Helicopters Model : MD 900 Date of application : May 11, 2005
Date of issuance : May 31, 2007
( Signature) Lance T. Gant, Manager Rotorcraft Certification Office Southwest Region
( Title)
ST2804RC-R ASW-170 PE: JLH
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SR09480RC Date of Issuance: May 31, 2007
Description of Type Design Change (Continued):
revision is required. Aero Dynamix, Inc., Instructions for Continued Airworthiness (ICA), Document No. ICA MD900-01, Revision B, dated May 31, 2007, or later FAA accepted revision is required.
of this STC may affect the compatibility with NVG and may require a re-evaluation by the FAA Aircraft Certification Office (ACO). Once the aircraft is modified with this STC, any future modification to the aircraft may also affect compatibility with NVG and may require re-evaluation by the FAA ACO. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| MD Helicopter Inc. | MD900 | H19NM |