What it approves
Installation of replacement stainless steel hinges for engine and/or transmission cowling of EC 130 B4 and EC130 T2 aircraft
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (8/13) Page 1
Part of the Federal A viation Regulations.
Original Product – Type Certificate Number: MDNH:
MRGHO:
Signature
Title
SR09505RC Airbus Helicopters, Inc.
2701 N. Forum Drive Grand Prairie, Texas 75052-7099 27 H9EU Airbus Helicopters EC130 B4, T2
Installation of replacement stainless steel hinges for engine and/or transmission cowling of EC 130 B4 and EC130 T2 aircraft in accordance with Master Drawing List 130A82-8022 Rev. A dated 20 October 2015 or later ODA approved revision. Instructions for Continued Airworthiness 130MMS-024 Rev. IR, dated 5 May 2015 or later FTW AEG accepted revision is required.
The installer must determine if this design change is compatible with previously approved modifications.
If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.
---END---
4/6/2015 11/3/2015
Fred Stellar ODA Lead Administrator ODA-700097-SW
FAA Form 8110-2 (8/13) Page 2
To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):
SR09505RC
FAA Form 8110-2 (8/13) Page 3
SR09505RC
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.