What it approves
Installation of extended pilot and copilot seat rails
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___
Part of .
SR09512DS Airbus Helicopters, Inc.
2701 N. Forum Drive Grand Prairie, Texas 75052-7099 27 Federal Aviation Regulations H9EU Airbus Helicopters AS350B2 and AS350B3 Installation of extended pilot and copilot seat rails in accordance with Airbus Helicopters, Inc. Master Drawing List (MDL) 350A82-1798 Rev. F dated 07/14/2020 or later ODA approved revision. Rotorcraft Flight Manual Supplement 350FMS-574 Rev.
IR dated 07/24/2020or later ODA approved revision and Instructions for Continued Airworthiness (ICA) 350MMS-043 Rev. A dated 06/24/2020 or later ODA or AEG accepted revision are required.
For Certification Basis, see continuation sheet 3.
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission. --see continuation sheet 3-- 08/10/2018 07/24/2020 Gina Gonzales AHI ODA Lead Administrator ODA-700097-SW 3
FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___
SR09512DS 3
SR09512DS Description of Type Design Change (continued from sheet 1):
Certification Basis: Based on 14 CFR §§ 21.115 and 21.101 and the FAA policy for significant changes in FAA Order 8110.48A, the certification basis is the same as TCDS H9EU, Rev 23, 11/18/2014 except for the following:
14 CFR § 27.2 at Amendment 27-37 14 CFR § 27.562(a1)(c5) at Amendment 27-25 14 CFR § 27.625 at Amendment 27-35 14 CFR § 27.773 at Amendment 27-50 14 CFR § 27.785(a)(b)(c)(d) at Amendment 27-35 14 CFR § 27.805(a)(b) at Amendment 27-37
Limitations and Conditions (continued from sheet 1):
3. This STC is applicable to all serial numbers for this Make-Model.
4. When passengers are seated in either the left or right aft seats, the associated Pax Seat Rail Stop must be installed.
--END-- The latest effective date of this STC is 07/24/2020 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.