Supplemental type certificate · Bell Helicopter Textron Inc.

Holder
Bell Helicopter Textron Inc. · United States
Status
Current · Reissued
Status date
February 9, 2011
Applied
July 13, 2009
Product
Aircraft · Rotorcraft
Certification basis
Part 21, Part 27
Data sheet
TCDSR00003RD

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of a Health and Usage Monitoring System (HUMS) in accordance with the Master Drawing List (AA-09033 Revision D, dated October 26, 2010 or later FAA approved revision). Rotorcraft Flight Manual Supplement (Report No. AA-09040 Revision 0, dated November 9, 2010, or later FAA approved revision) is required. Instructions for Continued Airworthiness (Report No. AA-09041 Revision B, dated November 9, 2010, or later FAA accepted revision) is required.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SR09536RC-D This certificate issued to

Part 27 of the Federal Aviation Regulations.

Installation of a Health and Usage Monitoring System (HUMS) in accordance with the Master Drawing List (AA-09033 Revision D, dated October 26, 2010 or later FAA approved revision). Rotorcraft Flight Manual Supplement (Report No. AA-09040 Revision 0, dated November 9, 2010, or later FAA approved revision) is required. Instructions for Continued Airworthiness (Report No. AA-09041 Revision B, dated November 9, 2010, or later FAA accepted revision) is required.

Bell Helicopter Textron, Inc.

441 Industrial Park Road Piney Flats, TN 37686 R00003RD Make: Bell Helicopter Textron Canada Model: 429

Date reissued: February 9, 2011

( Signature) James A. Richmond, Acting Manager Rotorcraft Certification Office, Southwest Region

( Title)

Date of application: July 13, 2009

Date of issuance: December 03, 2010

FAA Form 8110-2-1(10-69) Page 2 of 3

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SR09536RC-D Date of Issuance: December 03, 2010 Date of Reissuance: February 9, 2011

The HUMS kit is installed on a non-required/non-hazardous basis. The utilization of the HUMS kit for maintenance credit is limited to: 1) Main Rotor Track and Balance;

2) Tail Rotor Dynamic Balance; and 3) Frahm Vibration Absorber Tuning. HUMS data may not be used for usage health or condition-based maintenance credits, such as extending Bell Helicopter’s published component lives or maintenance/inspection intervals. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Certification Basis:

Subpart C

27.251, 27.301, 27.303, 27.305(a), 27.307(a)[26], 27.337(a)[26], 27.561(b)[32],

27.571(a)(b)[26]

Subpart D

27.601(a), 27.603(b)[16], 27.605(a)[16], 27.609(a), 27.610[37], 27.611(a)(b),

27.613(c)(d)[26], 27.619, 27.625(a)[35], 27.771(a)

Subpart E

27.1141(e)[33]

Subpart F

27.1301, 27.1305(k)[37], 27.1307, 27.1309(a)(b)(d)[21], 27.1322(c)(d)[11], 27.1327[13],

27.1351(a)(b)[13], 27.1357(a)(c)[13], 27.1365[35], 27.1367

Subpart G

27.1501[14], 27.1529[18], 27.1581[14], 27.1585(a)[21]

Appendix A A27.1, A27.2, A27.3[18], A27.4[24]

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Bell Helicopter Textron Canada Limited429R00003RD