STC SR09542RC

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title H13EU REB Technologies, Inc.

1500 Brown Trail Bedford, TX 76022 3 SR09542RC Federal Aviation Regulations 29 Airbus Helicopters Deutschland GmbH (AHD) MBB-BK 117 C-2 Installation of Night Vision Goggle (NVG) Compatible Interior Lighting System in accordance with REB Technologies, Inc., Master Drawing List (MDL) Document No. 98020145MDL, Rev. B, dated September 7, 2011, or later Federal Aviation Administration (FAA) approved revision. Rotorcraft Flight Manual Supplement (RFMS), REB Technologies, Inc.

Document No. 98020145-RFMS, Rev. B, dated September 06, 2017, or later FAA approved revision is required.

(See continuation Sheet 3 of 3) Installation of NVG compatible interior lighting system does not include or imply approval for flight operations with NVGs. The operator must receive a determination from their civil aviation authority if an approval to operate with NVGs is required. Any subsequent deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the compatibility of

(See continuation Sheet 3 of 3) September 07, 2017 August 15, 2008 December 11, 2008 Jim Grigg Manager, Fort Worth ACO Branch Compliance & Airworthiness Division

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SR09542RC

FAA Form 8110-2 (5/14) Page 3 of 3 Date of Issuance: December 11, 2008 Reissuance Date: September 07, 2017

Description of Type Design Change (Continued):

Instructions for Continued Airworthiness (ICA), REB Technologies, Inc. Document No. 98020145-ICA, Rev. C, dated July 24, 2017, or later FAA accepted revision is required.

the NVIS and will require a re-evaluation for NVIS cockpit and NVG compatibility. The aircraft is not certificated for NVG operations until the evaluation is completed. Once the aircraft is modified with this STC, any future modification to the aircraft may also affect the compatibility with NVG and may require a re-evaluation by the FAA Flight Test Branch. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

SR09542RC