STC SR09558RC

Number SR09558RC This certificate issued to: Aero Dynamix, Inc.

3227 W. Euless Blvd.

Suite 100 Euless, TX 76040

Part 27 of the Federal Aviation Regulations.

Original P roduct – Type Certificate Number: H9EU

Make: Eurocopter France

Model: AS350B3, S/N 7554 and 7556 only

Description of Type Design Change: Installation of Night Vision Goggle (NVG) Compatible Lighting System in accordance with Aero Dynamix, Inc., Master Drawing List, Document No. MDL 2542-01, Rev. BB, dated November 19, 2013, or later Federal Aviation Administration (FAA) approved revision. Aero Dynamix, Inc., Rotorcraft Flight Manual Supplement, Document No.

RFMS AS350B3-02, Rev. A, dated November 22, 2013, or later FAA approved revision is required.

(see continutation sheet 3 of 3)

Limitations and Conditions: Installation of this Night Vision Imaging System (NVIS) does not approve or imply approval for flight operations with NVGs. The operator must receive a determination from their civil aviation authority if an approval to operate with NVGs is required. Any subsequent deviation from the cockpit or cabin configuration specified in the STC Type Design may affect the compatibility of the NVIS and will require a re-evaluation for NVIS cockpit and NVG compatibility.

(see continutation sheet 3 of 3)

Date of application: September 21, 2009 Date reissued:

Date of issuance: October 20, 2009 Date amended: November 22, 2013

(Signature) Scott A. Horn, Acting Manager Rotorcaft Certification Office Southwest Region

(Title)

FAA Form 8110-2 (8/13) Page 1 P/N SA03503RC-R PE APG ASW-170

Number SR09558RC

Description of Type Design Change: Aero Dynamix, Inc., Instructions for Continued Airworthiness (ICA), Document No. ICA AS350B3-01, Rev. AZ, dated November 19, 2013, or later FAA accepted revision is required.

Limitations and Conditions: The aircraft is not certificated for NVG operations until the evaluation is completed.

Once this aircraft is modified with this STC, any future modification to the aircraft may also affect compatibility with NVG and may require re-evaluation by the FAA Aircraft Certification Office (ACO). The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

FAA Form 8110-2 (8/13) Page 3

SUPPLEMENTAL TYPE CERTIFICATE, FAA FORM 8110-2 (CONTINUED)

To (Name of transferee)

(Address of transferee)

(Number and street)

(City, State, and ZIP Code)

From (Name of grantor)

(Address of grantor)

(Number and street)

(City, State, and ZIP Code)

FAA Form 8110-2 (8/13) Page 2