What it approves
Installation of an L-3 Wescam MX-10 System Kit
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (8/13) Page 1 Number:
Part of the Federal Aviation Regulations.
Original Product – Type Certificate Number: MDNH:
MRGHO:
By direction of the Administrator Signature Title SR09605RC Bell Helicopter Textron Inc.
441 Industrial Park Road Piney Flats, TN 37686 27 H2SW Bell Helicopter Textron Canada Limited 407 Installation of an L-3 Wescam MX-10 System Kit in accordance with the Master Drawing List, Report No. AA-12004, Revision L, dated April 18, 2017, or later FAA approved revision. Aeronautical Accessories Instructions for Continued Airworthiness, Report No. AA-12009, No Revision, dated October 8, 2013, or later FAA accepted revision, is required. Aeronautical Accessories Rotorcraft Flight Manual Supplement, Report No. AA-12010, No Revision, dated May 9, 2014, or later FAA approved revision, is required.
Installation of a FLIR U8500 Kit in accordance with the Master Drawing List, Report No. AA-12004, Revision L, dated April 18, 2017, or later FAA approved revision. Aeronautical Accessories Instructions for Continued Airworthiness, Report No.
AA-16098, No Revision, dated February 1, 2017, or later FAA accepted revision, is required. Aeronautical Accessories Rotorcraft Flight Manual Supplement, Report No. AA-16099, No Revision, dated May 30, 2017, or later FAA approved revision, is required.
-See Continuation Sheet- 1/21/2013 5/28/2014 5/31/2017 Thomas W. Brooks ODA Lead administrator BHTI ODA-710621-SW
FAA Form 8110-2 (8/13) Page 2
To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):
SR09605RC
FAA Form 8110-2 (8/13) Page 3 SR09605RC Continuation Sheet 1 of 1.
5/31/2017
Eligible for installation on S/N 54300-Subsequent. High skid landing gear required for installation. Wescam MX-10 and FLIR U8500 laser electrically disabled and not FAA approved. The FAA has not certified the installation of the Wescam MX-10 system GPS antenna; additional FAA approval is required to install the Wescam MX-10 system GPS antenna. The FAA must evaluate the Wescam MX-10 system GPS antenna installation to ensure it complies with the applicable airworthiness standards.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
MX-10 Certification Basis:
Subpart B 27.141(a) [27-21], 27.143(a)(1)(2)(i)(ii)(iii)(iv)(v)(c)(d)(f) [27-44], 27.171 [27-0], 27.173(a) [27-44],
27.175 [27-44], 27.177(a)(b) [27-44], 27.251 [27-0] Subpart C 27.301 [27-0], 27.303 [27-0], 27.305(a) [27-0], 27.307(a) [27-26], 27.337(a) [27-26], 27.561(b)(3) [27-0] Subpart D 27.601(a) [27-0], 27.603(b)(c) [27-16], 27.605(a) [27-16], 27.609(a) [27-0], 27.610 [27-37], 27.613(d) [27-26],
27.619 [27-0], 27.625(a) [27-0], 27.723 [27-0], 27.725(a)(c) [27-0], 27.727 [27-26], 27.771(a) [27-0],
27.773(a)(1)(b) [27-0], 27.853(a) [27-17] Subpart F 27.1301 [27-0], 27.1309(a)(c)(d) [27-21], 27.1351(a)(b) [27-13], 27.1357(a)(c) [27-13], 27.1365 [27-35],
27.1367 [27-0] Subpart G 27.1501 [27-14], 27.1505(c) [27-21], 27.1523(a)(b) [27-0], 27.1529 [27-18], 27.1541(a)(2)(b) [27-0],
27.1581 [27-14], 27.1583(e) [27-16], 27.1585(a) [27-21] Appendix A A27.1 [27-18], A27.2 [27-18], A27.3 [27-18], A27.4 [27-24]
FLIR U8500 Certification Basis:
Subpart C 27.301 [27-0], 27.303 [27-0], 27.305(a) [27-0], 27.307(a) [27-26], 27.337(a) [27-26], 27.561(b)(3) [27-0] Subpart D 27.601(a) [27-0], 27.603(b)(c) [27-16], 27.605(a) [27-16], 27.609(a) [27-0], 27.610 [27-37], 27.613(d) [27-26],
27.619 [27-0], 27.625(a) [27-0], 27.723 [27-0], 27.725(a)(c) [27-0], 27.727 [27-26], 27.771(a) [27-0],
27.773(a)(1)(b) [27-0] Subpart F 27.1301 [27-0], 27.1309(a)(c)(d) [27-21], 27.1351(a)(b) [27-13], 27.1357(a)(c) [27-13], 27.1365(a)(b) [27-35],
27.1367 [27-0] Subpart G 27.1501 [27-14], 27.1523(a)(b) [27-0], 27.1529 [27-18], 27.1541(a)(2)(b) [27-0], 27.1581 [27-14],
27.1583(d) [27-16], 27.1585(a) [27-21] Appendix A A27.1 [27-18], A27.2 [27-18], A27.3 [27-18], A27.4 [27-47]
- END -
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 407 | H2SW |