STC SR09650RC

Number SR09650RC

This certificate issued to: Aero Dynamix, Inc.

3227 W. Euless Blvd.

Euless, TX 76040

Part 29 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: H1NE Make: Sikorsky Aircraft Corporation Model: S-76D

Installation of Night Vision Imaging System (NVIS)/Night Vision Goggles (NVG) Compatible Lighting in accordance with Aero Dynamix, Inc., Master Drawing List MDL 7401-01, Revision A, dated April 1, 2015, or later Federal Aviation Administration (FAA) approved revision.

Installation of NVIS/NVG Compatible Lighting does not include or imply approval for flight operations with NVGs.

The operator must receive a determination from their civil aviation authority if an approval to operate with NVGs is required. Any subsequent deviation to the cockpit/cabin configuration specified in the type design of this STC may affect the compatibility of

Date of application: June 6, 2014 Date reissued:

Date of issuance: April 3, 2015 Date amended:

Form 8110-2 (5/14) page 1 of 3 P/N: ST03520RC-R PE: APG OFFICE: ASW-140 Signature Scott A. Horn Title Manager, Fort Worth Aircraft Certification Office Southwest Region

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SR09650RC Date of Issuance: April 3, 2015

Description of Type Design Change (Continued):

Aero Dynamix, Inc., Rotorcraft Flight Manual Supplement (RFMS), Document No. RFMS S76D-01, Rev. IR, dated April 3, 2015, or later FAA approved revision is required. Aero Dynamix, Inc., Instructions for Continued Airworthiness (ICA), Document No. ICA S76D-01, Rev. IR, dated April 3, 2015, or later FAA accepted revision is required.

the NVIS and will require a re-evaluation for NVIS cockpit and NVG compatibility. The aircraft is not certificated for NVG operations until the evaluation is completed. Once the aircraft is modified with this STC, any future modification to the aircraft may also affect the compatibility with NVG and may require a re-evaluation by the FAA Aircraft Certification Office. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

-END-

Form 8110-2 (5/14) Page 3 of 3

To (Name and address of transferee)

From (Name and address of grantor)

(Ref. 14 CFR 21.120

FAA Form 8110-2 (5/14) page 2 of 3