What it approves
Installation of floor protectors
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title 2 SR09870AC Helifab 1318 Smede Hwy.
Broussard, LA 70518 Federal Aviation Regulations.
27 Installation of floor protectors in accordance with Helifab Master Drawing List HF-MDL-7-3, Revision IR, dated June 15, 2016, or later FAA approved revision.
1) Instructions for Continued Airworthiness, Helifab Report No. HF-CA-7-3, Revision IR, dated June 15, 2016, or later FAA accepted revision is required for the installation.
2) Compatibility of this design change with previously approved modifications must be determined by the installer.
3) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Bell Helicopter Textron Canada Limited 206B; 206L; 206L-1; 206L-3; 206L-4; 407
April 6, 2016 March 6, 2017 H2SW Jim Grigg, Manager Fort Worth Aircraft Certification Office Southwest Region
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
2 SR09870AC
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 6
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 206B | H2SW |
| Bell Helicopter Textron Canada Limited | 206L | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-1 | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-3 | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-4 | H2SW |
| Bell Helicopter Textron Canada Limited | 407 | H2SW |