STC SR11193DS

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___

Part of .

SR11193DS Airbus Helicopters, Inc.

2701 N. Forum Drive Grand Prairie, Texas 75052-7099 27 Federal Aviation Regulations H9EU Airbus Helicopters AS350 B3 Installation of seat back accessory boxes in accordance with Airbus Helicopters, Inc. Master Drawing List 350A82-1900 Rev. B dated 05/15/2020 or later ODA approved revision. Rotorcraft Flight Manual Supplement 350FMS-575 Rev. IR dated 07/16/2020, or later ODA approved revision, and Instructions for Continued Airworthiness 350MMS-047 Rev. IR dated 06/10/2020, or later ODA or AEG accepted revision, are required.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission. ---see continuation sheet 3--- 10/05/2018 07/20/2020 Gina Gonzales ODA Lead Administrator ODA-700097-SW

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___

SR11193DS

SR11193DS Certification Basis (continued from sheet 1):

Based on 14 CFR §§ 21.115 and 21.101 and the FAA policy for significant changes in FAA Order 8110.48A, the certification basis is the same as TCDS H9EU, Rev 23, 11/18/2014 except for the following:

14 CFR 27.2 Amendment 27-37, 27.562(a1)(c5) Amendment 27-25, 27.785 (a)(b)(c)

(d) Amendment 27-35.

Limitations and Conditions (continued from sheet 1):

3. This STC is applicable to all serial numbers for this Make-Model.

4. With this seat accessory installed on a crew seat, no passenger shall be seated directly behind the affected crew seat.

--END-- The latest effective date of this STC is 07/20/2020.