What it approves
Installation of High Skid Landing Gear
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (8/13) Page 1
Part of the Federal A viation Regulations.
Original Product – Type Certificate Number: MDNH:
MRGHO:
Signature
Title
SR11239DS Bell Helicopter Textron Inc.
441 Industrial Park Road Piney Flats, TN 37686 27 R00008RD Bell Helicopter Textron Canada Limited 505 Installation of High Skid Landing Gear in accordance with Master Drawing List, Report No. AA-17071, Revision C, dated September 5, 2018, or later FAA approved revision. Aeronautical Accessories Rotorcraft Flight Manual Supplement, Report No. AA-17096, No Revision, dated September 18, 2018, or later FAA approved revision, is required.
Installation of Crew Steps in accordance with Master Drawing List, Report No. AA-17071, Revision C, dated September 5, 2018, or later FAA approved revision. Aeronautical Accessories Instructions for Continued Airworthiness, Report No.
AA-18017, No Revision, dated August 30, 2018, or later FAA accepted revision, is required.
Aeronautical Accessories Instructions for Continued Airworthiness, Report No. AA-17062, No Revision, dated August 30, 2018, or later FAA approved revision, is required for High Skid Landing Gear.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
1/5/2018 9/27/2018 John T. Bouma ODA Lead administrator BHTI ODA-710621-SW
FAA Form 8110-2 (8/13) Page 2
To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):
SR11239DS
FAA Form 8110-2 (8/13) Page 3
SR11239DS Continuation Sheet 1 of 1.
9/27/2018
Certification Basis:
Subpart B 27.49(a)(1)(2)(ii) [27-44], 27.75(a) [27-44], 27.141(a) [27-21], 27.143(a) [27-44], 27.171 [27-0], 27.251 [27-0];
Subpart C 27.301 [27-0], 27.303 [27-0], 27.305(a) [27-0], 27.307 [27-26], 27.337(a) [27-26], 27.471 [27-0], 27.473 [27-2],
27.501 [27-26], 27.549(a)(b)(c) [27-3], 27.571(a)(c) [27-26];
Subpart D 27.601(a) [27-0], 27.603 [27-16], 27.605(a) [27-16], 27.609(a) [27-0], 27.611 [27-0], 27.613(d) [27-26],
27.619(b) [27-0], 27.625(a) [27-35], 27.723 [27-0], 27.725 [27-0], 27.727[27-26];
Subpart G 27.1505(a)(2)(ii) [27-21], 27.1529 [27-18], 27.1581 [27-14], 27.1587(a)(2)(i) [27-44];
Appendix A A27.1 [27-18], A27.2 [27-18], A27.3 [27-18], A27.4 [27-47].
Equivalent Level of Safety Findings have been made for the following regulations:
14 CFR 27.307, 27.723, 27.725, and 27.727 (documented in RSB ELOS Memorandum ST0118DS-R-A-1).
- END -
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 505 | R00008RD |