STC SR11248DS

Supplemental type certificate · Bell Helicopter Textron Inc.

Holder
Bell Helicopter Textron Inc. · United States
Status
Current · Issued
Status date
December 8, 2020
Applied
March 10, 2020
Product
Aircraft · Rotorcraft
Certification basis
Part 21
Data sheet
TCDSH2SW

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of Connected Aircraft Interface Residing On-board (CAIRO) System

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

Part of .

SR11248DS Bell Textron Inc.

441 Industrial Park Road Piney Flats, TN 37686 27 the Code of Federal Regulations H2SW Bell Textron Canada Limited 407 Installation of Connected Aircraft Interface Residing On-board (CAIRO) System in accordance with Master Drawing List, Report No. AA-20023, Revision B, dated September 3, 2020, or later FAA approved revision.

Aeronautical Accessories Instructions for Continued Airworthiness, Report No. AA-20022, No Revision, dated February 24, 2020, or later FAA accepted revision, is required.

This STC is applicable to serial numbers 53000 to 54299 with 407 G1000NXi Glass Cockpit Upgrade, STC No. SR11245DS, and to serial numbers 54805 and subsequent for the Bell Textron Canada Limited 407.

Limitations and Conditions continued. See Continuation Sheet 1.

03/10/2020 12/08/2020 John T. Bouma ODA Lead administrator BTI ODA-710621-SW 3

FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

SR11248DS 3

FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

SR11248DS Continuation Sheet 1 of 1.

12/08/2020

The installer must determine whether this design change is compatible with previously approved modifications.

If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Certification Basis:

Subpart C 27.301 [27-0], 27.303 [27-0], 27.305(a) [27-0], 27.307(a) [27-26],

27.337(a) [27-26], 27.561(b)(3) [27-0];

Subpart D 27.601(a) [27-0], 27.603 [27-16], 27.605(a) [27-16], 27.609(a) [27-0],

27.613(b)(2)(d) [27-26], 27.619(b) [27-0], 27.625(a) [27-35],

27.853(a) [27-37];

Subpart F 27.1301(a)(b)(d) [27-0], 27.1307(e) [27-0], 27.1309(a)(c) [27-21],

27.1351(a)(b) [27-13], 27.1357(a) [27-13], 27.1365 [27-35];

Subpart G 27.1529 [27-18];

Appendix A A27.1 [27-18], A27.2 [27-18], A27.3 [27-18], A27.4 [27-24].

- END - 3 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Bell Textron Canada Limited407H2SW