STC SR11317DS

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___

Part of .

SR11317DS Airbus Helicopters, Inc.

2701 N. Forum Drive Grand Prairie, Texas 75052-7099 27 Federal Aviation Regulations H9EU Airbus Helicopters AS350B3 Installation of a full width instrument panel in accordance with Airbus Helicopters, Inc. Master Drawing List (MDL) 350A82-1908 Rev. A dated 06/08/2020 or later ODA approved revision. Instructions for Continued Airworthiness (ICA) 350MMS-051 Rev. IR dated 06/26/2020 or later ODA or AEG accepted revision is required.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission. ---see continuation sheet 3--- 01/31/2020 07/31/2020 Gina Gonzales AHI ODA Lead Administrator ODA-700097-SW 3

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___

SR11317DS 3

SR11317DS Description (continued from sheet 1):

Certification Basis--Based on 14 CFR §§ 21.115 and 21.101 and the FAA policy for significant changes in FAA Order 8110.48A, the certification basis is the same as TCDS H9EU, Rev 23, 11/18/2014 except for the following: 14 CFR § 27.562(a1)(c5) at Amendment 27-25, 14 CFR § 27.773 at Amendment 27-50, and 14 CFR § 27.805(a)(b) at Amendment 27-37.

Limitations and Conditions (continued from sheet 1):

3. This STC is limited to AS350B3 in the Post ECP OP-4962 configuration.

4. This STC does not certify any additional equipment installed in the instrument panel.

--END-- The latest effective date of this STC is 07/31/2020.