STC SR12068IB

FAA 8110-2 (10/24) Page 1 of ___ IMPORT SR12068IB Alpine Aerotech LP 1260 Industrial Road West Kelowna, BC Canada V1Z 1G5 Part 29 Title 14, Code of Federal Regulations H4SW Bell 212, 412, 412EP

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

2. The installer must determine whether this design change is compatible with previously approved modifications.

(See continuation sheets 3 through 4) 7/11/2022 7/11/2025 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 4

1. Installation of the AFI4700 Electronic Flight Instrument must be done in accordance with Alpine Aerotech Installation Instructions AAL-280-125-001, Revision NI, Transport Canada Civil Aviation (TCCA) approved April 27, 2022, or later TCCA approved revision.

2. Operation must be done in accordance with Genesys Rotorcraft Flight Manual Supplement A198601, Issue A, TCCA approved April 27, 2022, or ater TCCA approved revision.

3. Maintenance must be done in accordance with Alpine Aerotech Instructions for Continuing Airworthiness AAL-280-125-701, Revision NI, dated February 14, 2022, or later TCCA accepted revision.

4. Definition of Type Design Change is found in Alpine Aerotech Master Data List AAL-280-124-001, Revision NI, TCCA approved April 27, 2022, or later TCCA approved revision.

3. This STC is applicable to all serial numbers for the Make/Models.

4. This modification has been determined by review to be a no acoustic change in accordance with 14 CFR 21.93(b).

Certification Basis:

Based on Title 14 Code of Federal Regulations (14 CFR) § 21.115 and § 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48, the type certification basis for modified Bell Helicopters, Models 212, 412, and 412EP, is as follows:

a. The type certification basis for the Bell Helicopters, Models 212, 412, and 412EP, is shown on Type Certificate Data Sheet (TCDS) H4SW for parts not changed or not affected by the change.

b. The type certification basis for the Bell Helicopters, Models 212, 412, and 412EP, for parts changed or affected by the change is 14 CFR Part 29 at Amendments 29-1 through 29-57 as follows:

Regulations at the latest amendment through 29-57:

29.29, 29.301, 29.303, 29.305, 29.307, 29.549, 29.561, 29.601, 29.603, 29.605, 29.607,

29.609, 29.610, 29.611, 29.613, 29.619, 29.625, 29.771(a)(b)(c), 29.773(a), 29.777(a),

29.853(a), 29.1301, 29.1303, 29.1309, 29.1316, 29.1317, 29.1321, 29.1322, 29.1327,

29.1329(f), 29.1331, 29.1333, 29.1335, 29.1351(a)(d), 29.1353(a)(b), 29.1355, 29.1357,

29.1359, 29.1381, 29.1431, 29.1501, 29.1529, 29.1541, 29.1555(a), 29.1581, 29.1583,

29.1585

----------END---------- 4 4