STC SR12419IB

Supplemental type certificate · KAELIN AIRCRAFTSTRUCTURE GmbH

Holder
KAELIN AIRCRAFTSTRUCTURE GmbH · SWITZERLAND
Status
Current · Issued
Status date
June 18, 2026
Applied
March 2, 2026
Product
Aircraft · Rotorcraft
Certification basis
Part 27
Data sheet
TCDSH9EU
Foreign approvals
EASA 10088359 Rev 0

From FAA DRS, with our copy of the certificate PDF. DRS record last changed June 23, 2026.

What it approves

Installation of a cockpit floor window P/N 53001002750

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

IMPORT SR12419IB 6203 SEMPACH STATION

SWITZERLAND Part 27 Title 14 Code of Federal Regulations H9EU Airbus Helicopters AS350B3

1. This STC is applicable to all serial numbers for the applicable models.

(See Limitations and Conditions Continued on Page 3 of 3) 03/02/2026 06/18/2026 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

1. Installation of a cockpit floor window P/N 53001002750 in accordance with AeroFEM GmbH Service Bulletin Number AEF-0694-SBU-0006, Issue 02, dated October 13, 2025, or later EASA approved revisions.

(See Description of Type Design Change Continued on Page 3 of 3)

2. Operation in accordance with AeroFEM GmbH Flight Manual Supplement Document Number AEF-0694-FMS-0004, Issue 02, dated October 15, 2025, or later EASA approved revision.

3. Maintenance in accordance with AeroFEM GmbH Document Number AEF-0694-ICA-0006, Issue 02, dated October 13, 2025, or later EASA accepted revision.

2. For pre-requisite modifications and compatibility, refer to Service Bulletin listed in the Description of Type Design section of this STC.

3. Maintenance must be in accordance with Section 4 of the Instructions for Continued Airworthiness listed in the Description of Type Design section of this STC.

4. Operation must be in accordance with the Limitation Section of the Flight Manual Supplement listed in the Description of Type Design section of this STC.

5. The installer must determine whether this design change is compatible with previously approved modifications.

6. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

----------END---------- 3 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Airbus HelicoptersAS350B3H9EU