What it approves
Fabrication of equipment must be in accordance with the applicable Manufacturing Procedure document as shown on the attached FAA AML No. SR12433IB.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA 8110-2 (10/24) Page 1 of ___ IMPORT SR12433IB Lake Central Air Services 1016 Sabre Lane, Muskoka Airport, R.R. 1 Gravenhurst, Ontario Canada P1P 1R1 Part 27 Title 14, Code of Federal Regulations *See attached FAA Approved Model List (AML) No. SR12433IB for a list of approved models and applicable airworthiness regulations.
*See attached FAA AML No. SR12433IB *See attached FAA AML No. SR12433IB
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
2. The installer must determine whether this design change is compatible with previously approved modifications.
(See continuation sheet 3) 07/02/2026 07/07/2026 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3 Installation of internally mounted equipment
1. Fabrication of equipment must be in accordance with the applicable Manufacturing Procedure document as shown on the attached FAA AML No. SR12433IB.
2. Installation, removal, and inspection must be in accordance with the applicable Master Drawing List and Instructions for Continued Airworthiness / Installation Instructions document as shown on the attached FAA AML No. SR12433IB.
3. Required placard information is specified in the applicable Instructions for Continued Airworthiness / Installation Instructions document as shown on the attached FAA AML No.
SR12433IB.
4. Operation must be in accordance with the applicable Flight Manual Supplement document as shown on the attached FAA AML No. SR12433IB.
3. This STC is applicable to all serial numbers for the Make-Models as shown on the attached FAA AML No. SR12433IB.
4. Operation must be in accordance with the Limitations section of the applicable Flight Manual Supplement referenced in the Description of Type Design Change section of this STC.
----------END---------- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 7
Every issue · 1
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| July 7, 2026 | Issued, current | CertificateApproved model list |