STC ST00007LB-D

This Certificate issued to United Air Lines, Inc.

600 Jefferson Street Houston, Texas 77002

Part 25 of the Federal Aviation Regulations. See Type Certificate Data Sheet A2NM for Special Conditions.

A2NM

Boeing

757-200 Series Description of Type Design Change : Modifies the aircraft to insta ll a one way check valve in the yaw damper actuator hydraulic return port. The in stallation is in accordance with DAS-1-WE Approved United Air Lines Drawing List No. 00007 dated June 1, 1995, or later approved FAA revisions.

Limitations and Conditions: Approval of this installation applies to all 757-200 series aircraft. This approval does not extend to other aircraft of this model on which othe r previously approved modifications are incorporated unless it is determined by the installer that this interrelationship between this change and any of those other previously a pproved modifications will introduce no adverse affect upon the airworthiness of that aircraft. If the holder ag rees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: October 10, 1994

Date of issuance: June 1, 1995

Date reissued: November 30, 2011

( Signature) Haifa Haj-Eid Supervisor, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)

NOTE:

DO NOT DELETE THIS PAGE.

DO NOT ADD ANY DATA TO THIS PAGE.

THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.