What it approves
Interior reconfiguration of the forward lounge by replacing a divan and coffee table with club seating and a dining table
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
IMPORT ST00020IB
JET AVIATION AG AESCHENGRABEN 6 4051 BASEL, SWITZERLAND Part 25 Title 14 Code of Federal Regulations A16WE
THE BOEING COMPANY 737-700
1) Interior reconfiguration of the forward lounge by replacing a divan and coffee table with club seating and a dining table in accordance with Master Data List document JBSL-M-00084MDL-01, Issue 6, dated October 13, 2021 or later EASA approved revisions
(See Description of Type Design Change continued on Page 3 of 3)
1) The installer must determine whether this design change is compatible with previously approved modifications.
(See Limitations and Conditions continued on Page 3 of 3) July 19, 2021 October 27, 2021 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3
IMPORT ST00020IB 3
IMPORT ST00020IB Date of Issuance: October 27, 2021
Description of Type Design Change: (continued from page 1 of 3)
2) Maintenance is in accordance with Instructions for Continued Airworthiness (ICA) document, JBSL-M-00084ICA-01, Issue 4, dated October 12, 2021 or later EASA accepted revisions.
3) Operation must be in accordance with Flight Manual Supplement (AFMS) document, JBSL-M-00084AFM-01, Issue 03, dated June 08, 2021 or later EASA approved revisions.
Limitation and Conditions: (continued from page 1 of 3)
2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
3) The utilization of this aircraft, when configured with this STC, is limited to “private, not for hire or common carriage use."
4) You can not use descriptive data about this design change to duplicate other products. This approval is limited to only the installation made in The Boeing Company 737-700 IGW, Serial Number 30791. This STC does not permit manufacturing of parts for multiple installations.
5) Operation must be in accordance with the "Limitations" section of Airplane Flight Manual Supplement document " referenced in the Description of Type Design Change section of this STC.
6) Maximum passenger seating capacity is limited to 15 and only in the seats designated as occupiable during taxi, takeoff and landing.
7) FAA STC ST01381NY is a prerequisite for this interior modification.
-----END----- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 737-700 Series | A16WE |