STC ST00029IB

IMPORT ST00029IB Mid Canada Mod Center Hanger #9; 2450 Derry Road East Mississauga, Ontario Canada L5S 1B2 Part 25 Title 14 Code of Federal Regulations A9NM Textron Aviation 650

1. Installation of Deviations to FAA STC ST02654LA must be done in accordance with Avionics Design Services Ltd. Master Drawing List MDL20033, Revision N/C, Transport Canada Civil Aviation (TCCA) approved November 10, 2020, or later TCCA approved revision.

2. Operation must be done in accordance with Mid-Canada Mod Center Flight Manual Supplement FMS20033-1, Revision N/C, TCCA approved November 10, 2020, or later TCCA approved revision.

(Description of Type Design Change Continued on Page 3 of 3)

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) March 22, 2022 May 9, 2022

Anthony E. Gallo Manager, International Validation Branch (AIR-730) Compliance & Airworthiness Division Aircraft Certification Service (AIR) 4

IMPORT ST00029IB ST00029IB 4

IMPORT ST00029IB Date of Issuance: May 9, 2022

Description of Type Design Change (continued):

3. Maintenance must be done in accordance with Mid-Canada Mod Center Instructions for Continued Airworthiness ICA20033-1, Revision N/C, dated September 15, 2020, or later TCCA accepted revision.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This approval is limited to only the installation made in Textron Aviation, Model 650, Serial No. 6507055.

4. FAA STC ST00606CH-D and ST02654LA are pre-requisites to this approval.

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48, the certification basis for this modification to the Textron Aviation, Model 650, Serial No. 6507055, is as follows:

Regulations at the amendment level in TCDS:

25.1, 25.301 (a)(b)(c), 25.303, 25.305(a)(b), 25.307(a)(b), 25.365(a)(b)(d)(see special conditions 25-102-NM-7), 25.561(a)(b)(3)(c), 25.601, 25.603, 25.605, 25.609, 25.611,

25.613, 25.615(a), 25.619, 25.625(a)(b)(c), 25.671(a), 25.771(a), 25.789, 25.1301(a)(b)(c)(d),

25.1309(a)(b)(c)(d)(g), 25.1327, 25.1331(a)(1)(2), 25.1333(b), 25.1523(a)(b), 25.1529,

25.1545, 25.1555(a)

Regulations at an intermediate amendment:

25.571(a)(b)(5) (see special conditions 25-102-NM-7) Amdt 25-72, 25.1359(d) Amdt 25-32

(Certification Basis Continued on Page 4) 3 4

IMPORT ST00029IB Date of Issuance: May 9, 2022

Certification Basis (continued):

Regulations as amended through 25-136:

25.773(a)(2), 25.777(a)(b)(c), 25.853(a), 25.1303(a)(1)(2)(b)(c)(2), 25.1305(a)(2)(4)(5)

(6)(c)(1)(2)(3), 25.1307(d)(e), 25.1310(a)(1)(2)(3)(i)(4)(b), 25.1316, 25.1317(a)(b)(c),

25.1321, 25.1322(e)(1)(f), 25.1329(i)(j), 25.1337(b)(1), 25.1351(a)(d), 25.1353(a),

25.1357(a)(c)(d)(e), 25.1381(a)(1), 25.1431, 25.1501, 25.1543(b), 25.1549(a)(b)(c),

25.1581(a)(1)(2)(b)(d), 25.1585(a) ----------END---------- 4 4