STC ST00030IB

IMPORT ST00030IB

APTOZ EHF AKURGERDI 41 108 REYKJAVIK

ICELAND 25 Title 14 Code of Federal Regulations *See attached FAA approved model list *See attached FAA approved model list *See attached FAA approved model list

1. Installation of Tech Test ELT in accordance with APTOZ EHF documentation as listed on FAA approved model list (AML) No. AML ST00030IB Rev 1.

2. Operation must be in accordance with APTOZ EHF documentation as listed on FAA approved model list (AML) No. AML ST00030IB, Rev 1

3. Maintenance must be in accordance with APTOZ EHF documentation as listed on FAA approved model list (AML) No. AML ST00030IB, Rev 1.

1. The installer must determine whether this design change is compatible with previously approved modifications.

(Limitations and Conditions continued on page 3 of 4) April 6, 2022 August 14, 2023, November 3, 2025 December 27, 2022 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 4

IMPORT ST00030IB 4

IMPORT ST00030IB Limitations and Conditions: (continued from page 1 of 4)

2. The EASA approved Airworthiness Limitations section of the Instructions for Continued Airworthiness referenced in the Description of the Type Design Section of this STC is mandatory.

3. The aircraft must be operated in accordance with the operations limitations section of the Operation Manual Supplement referenced in the Description of Type Design section of this STC.

4. This STC is applicable to all serial numbers for this make-model listed on the FAA approved model list (AML).

5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

6. A copy of this certificate and the FAA Approved Model List (AML) No. AML ST00030IB Rev 1 reissued Novemeber 3, 2025 must be maintained as part of the permanent records for the modified aircraft.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for changes that are not significant in FAA order 8110.48A, the certification basis for this modification are as follows:

a. The Type Certification basis for the model series as shown on the FAA approved model list (AML) No. AML ST00030IB Rev 1 for parts not changed or not affected by the change.

(Certification Basis Continued on page 4 of 4)

IMPORT ST00030IB Certification basis: (continued from page 3 of 4)

b. The Type Certification basis for the model series as shown on the FAA approved model list (AML) No. AML ST00030IB Rev 1 for parts changed or affected by the change.

---END--- 4 4