STC ST00045MC-D

This Certificate issued to

Part 25* of the Federal Aviation Regulations.

Original Product Type Certificate Number: T00003NY

* SEE PAGE 3

Installation of structural and electrical provisions for communications equipment on a Bombardier BD-700-1A10 aircraft in accordance with Master Document List BAS67015002, revision (AA), dated May 26, 2010, FAA approved May 27, 2010, or later FAA approved revision.

(Description of Type Design Change continued on page 3 of 3)

1. This approval should not be extended to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. A copy of this certificate must be maintained as part of the permanent record for the modified aircraft.

(Limitations and Conditions continued on page 3 of 3)

This certificate and the supporting data which are the bases for approval shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Learjet Inc.

One Learjet Way Wichita, Kansas 67209 Make: Bombardier Inc.

Model: BD-700-1A10 Date of application : October 9, 2009

Date of issuance : May 27, 2010

Date amended : September 9, 2013

Original signed by Keith Johnston

(Signature) Keith Johnston ODA administrator ODA-501508-CE, Learjet Inc.

Wichita, Kansas (Title)

Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee)

(Address of transferee)

(Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type)

(Address of grantor)

(Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

Certification Basis:

Certification Basis of this STC is;

Defined on T.C.D.S. T00003NY with the addition of the following later regulation(s): 14 CFR Part 25, § 25.981 Amdt 25-125 for Bombardier BD-700-1A10 in the “XRS” configuration.

Defined on T.C.D.S. T00003NY for Bombardier BD-700-1A10 in the “Global 6000” configuration.

The following documents are required for MDL BAS67015002 (no dash #) configuration of this STC:

Airplane Flight Manual Supplement BAS67045001, Revision NC, FAA Approved May 27, 2010 or later FAA approved revision.

Instructions for Continued Airworthiness, BAS67015002-ICA-1, revision (NC), dated April 16, 2010, FAA accepted May 27, 2010 or later FAA accepted revision.

The following documents are required for MDL BAS67015002-003 configuration of this STC:

Airplane Flight Manual Supplement BAS67045001, Revision A, FAA Approved September 9, 2013 or later FAA approved revision.

Instructions for Continued Airworthiness, BAS67015002-ICA-1, revision (A), dated June 7, 2013, FAA accepted September 9, 2013 or later FAA accepted revision.

4. The FAA has not certified the equipment for which these provisions are intended. You must get additional FAA approval to install this equipment. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.

5. The installation of a new floorplan per STC ST00043MC-D is a prior or concurrent requirement.

---------- END ----------