What it approves
Installation of a class divider
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number 510006014 This certificate issued to: Flight Structures Inc.
Certifies that the change in the type design for the following product with the limitations and conditions therefor as specified hereon meets the airsorthinesseguirements of Purt 25 ofithe Federal Aviation Regulaions. (see Type Certification Data Sheet AINM for complete certification basis) Original Product -Type bertificate Number: AINM Make: Boeing Model: 767-200 Description of Type Design Change: Installation of a class divider in accordance with Flight Structures Inc. Master Drawing List 93FS251-D01, Revision A, dated January 27, 1994, or later FAA-approved revisions.
Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to aircraft of this model on which other Filitand frontdifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse eftect upon the airworthiness of that aircraft. A copy of this Certificate and Flight Structures Inc. Master Drawing List 93FS251-D01 must be maintained as part of the permanent records for the modified aircraft. This STC does not include substantiation to meet the heat release and smoke requirements of FAR 121.312(a).
Date of Application: . July 16, 1993 Jule missued:
Date of Issuance: February 11, 1994 Jale unended:
FEDERAL ATTATION OHINISTRAID Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 767-200 Series | A1NM |