STC ST00067IB

IMPORT ST00067IB

BOEING IRELAND LIMITED LEVEL 3 EAST, CLOGHRAN HOUSE

DUBLIN AIRPORT

DUBLIN AIRPORT K67 F3X2 IRELAND Part 25 Title 14 Code of Federal Regulations A16WE The Boeing Company B737-8

1. Installation of 16J/126Y to 189Y Interior Reconfiguration must be in accordance with Boeing Ireland Limited Change / Repair Approval BIL‐00229‐APP, Rev. 03, dated August 17, 2022, or later EASA approved revisions.

2. Maintanence must be in accordance with Boeing Ireland Limited Instructions for Continued Airworthiness BIL-00229-ICA01, Rev. 00, dated April 8, 2022, or later EASA accepted revisions.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions Continued on Page 3 of 3) September 23, 2022 September 27, 2022 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT ST00067IB 3

IMPORT ST00067IB Date of Issuance: September 27, 2022

2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. This STC is applicable to serial number as listed in Boeing Ireland Limited Change / Repair Approval BIL‐00229‐APP, Rev. 03, dated August 17, 2022.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48A, the certification basis for The Boeing Company Model B737-8 aircraft as follows:

a. The type certification basis is shown on TCDS A16WE for parts not changed or not affected by the change.

a. The type certification basis is shown on TCDS A16WE for parts changed or affected by the change.

----------END---------- 3 3