STC ST00069IB

IMPORT ST00069IB FOKKER TECHNIEK B.V.

AVIOLANDALAAN 31 4631 RP HOOGERHEIDE

NETHERLANDS 25 Title 14 Code of Federal Aviation Regulations A16WE The Boeing Company 737-800

1. Installation of VIP Cabin Interior in accordance with Master Data List, B737-HSMVS-MDL-0001, Issue 2 dated June 20, 2022 or later EASA approved revisions.

2. Operation must be in accordance with Airplane Flight Manual Supplement, Doc. No.

B737-HSMVS-AFM-S-001, Issue 3, dated June 16, 2022 or later EASA approved revisions.

(Description of Type Design Change continued on page 3 of 4)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(Limitations and Conditions continued on page 3 of 4) June 8, 2021 October 13, 2022 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 4

IMPORT ST00069IB 4

IMPORT ST00069IB Date Issued: October 13, 2022 Description of Type Design Change: (continued from page 1 of 4)

3. Maintenance must be accordance with Instructions for Continued Airworthiness and maintenance manuals,

- Doc. No. B737-HSMVS-ICA-S-002, rev 3, dated August 10, 2022 or later EASA approved revisions.

- Doc No. B737-HSMVS-AMM-S-002-1, rev 1,dated June 17, 2022 or later EASA approved revisions.

Limitations and Conditions: (continued from page 1 of 4)

2. The EASA approved Airworthiness Limitations section of the Instructions for Continued Airworthiness referenced in the Description of the Type Design Section of this STC is mandatory.

3. The aircraft must be operated in accordance with the operations limitations section of the Airplane Flight Manual Supplement referenced in the Description of Type Design section of this STC.

4. This STC is only applicable to serial number MSN 35478 for the Boeing 737-800 series.

5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

6. The maximum approved passenger seating capacity is 60. For Flights with passengers on board, three flight attendants are required.

7. This aircraft is for private, non-commercial operation only. Operations involving the carriage of people or property for compensation or hire is prohibited.

(limitations and conditions continued on page 4 of 4) 3 4

IMPORT ST00069IB Date Issued: October 13, 2022 Description of Type Design Change: (continued from page 3 of 4)

8. The following STCs are required to be installed concurrently for this modification:

FAA STC ST03939NY, ST01635LA, ST11121SC.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for changes that are not significant in FAA order 8110.48A, the certification basis for this modification are as follows:

a. The Type Certification basis for the 737-800 series is shown on TCDS A16WE for parts not changed or not affected by the change.

b. SFAR 109 was used to show compliance for this modification and to the following sections of 14 CFR part 25:

25. 785 (d): firm handhold

25. 785 (h) (2): direct view

25. 813 (e): interior doors

25. 815: Width of Aisle

25. 853: Materials for Compartment Interiors

25. 858(a-d): Smoke Detection- for isolated compartments

----END----