What it approves
Installation of Interior and Avionics Systems
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Par t 25 of the Federal Aviation R egulations.
Original Product Type Certificate N umber:
M ake:
M odel:
Description o f Type Design Change:
Installation of Interior and Avionics Systems in accordance with IAL Modification List No. ML100174, Rev. B, dated August 23, 1993.
1. The Canadian Department of Transport approved Flight Manual Supplement CL600-IAL-236, Smoke Detector-Baggage Compartment, dated July 26, 1993 is required.
2. The Canadian Department of Transport approved Flight Manual Supplement CL600-IAL-237, Ground Proximity Warning System, dated July 26, 1993 is required.
Bombardier Completion Center Inc.
200 Cote Vertu West Dorval, Quebec H4S 2A3 Canada
A21EA Bombardier, Inc.
CL-600-2B16, S/N 5128 Date of application : March 9, 1994
Date of issuance : April 20, 1994
Date reis sued: February 4, 2000
B y direction of the A dministrator
(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office
(Title)
FAA Form 8110-2-1(10-69) Page 3 of 3
N umber ST00082NY Date Reissued: February 4, 2000
3. The Canadian Department of Transport approved Flight Manual Supplement CL600-IAL-238, Scott Gaseous Oxygen System, dated July 26, 1993 is required.
4. The following documents are also required:
a. Maintenance Procedure Gaseous Oxygen System, Report Number T.M0706-004, Rev. G, dated February 19, 1993.
b. Inspection of Aft Overboard Servicing Installation Report Number T.M0375-0010 dated June 28, 1988.
c. Maintenance Manual Supplement for Cox Ribbon Heater, Doc. No. MMS-CL600-IAL-51 dated August 13, 1993.
d. Maintenance Manual Supplement Doc. No. MMS-CL600-IAL-52 dated August 20, 1993.
5. You cannot use descriptive data about this design change to duplicate other products. This approval is limited to only the installation made in Bombardier, Inc., Model CL-600-2B16, Serial No. 5128. This STC does not permit manufacturing of parts for multiple installations.
……….END……….
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.