What it approves
Installation of Honeywell Inc. MKVII EGPWS Enhanced Ground Proximity Warning System With RAAS (Runway Awareness and Advisory System)
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number ST00111MC
This certificate issued to: King Aerospace Commercial Corporation 402 Wright Drive Ardmore, Oklahoma 73401
Part 25 of the Federal Aviation Regulations.
Original Product - Type Certificate Number: A6WE Make: McDonnell Douglas Model: DC-9-32F(C-9B) Description of Type Design Change:
Installation of Honeywell Inc. MKVII EGPWS Enhanced Ground Proximity Warning System With RAAS (Runway Awareness and Advisory System), in accordance with King Aerospace Master Drawing List, Document Number 13-C9B-200, Revision D, dated May 9, 2014 or later FAA approved revision.
(See continuation sheet 3 of 3 for additional limitations)
Date of application: October 28, 2013 Date of issuance: June 20, 2014 Date reissued:
Signed (Signature) Derek Morgan Manager Military Certification Office (Title)
The FAA will reissue the certificate in the name of the transferee and forward it to him.
Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)
(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)
(City, State, and Zip code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
Number ST00111MC
1. The following documents are required as part of this installation:
a. Instructions for Continued Airworthiness, King Aerospace Document No. 13-C9B-207, Rev A, dated December 12, 2013, or later FAA approved revision shall be made available to the operator at the time of installation for incorporation into the operator’s maintenance program.
b. The Airplane Flight Manual Supplement, King Aerospace Document No. 13-C9B-202, Revision IR, dated June 20, 2014, or later FAA approved revisions, is required and must be carried in the aircraft during all flights.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of the permission.
3. Compatibility of this design with previously approved modifications must be determined by the installer.
------------------------------------------------------END-----------------------------------------------------------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | DC-9-32F (C-9B) | A6WE |