STC ST00125SE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: ST00125SE This certificate issued to: Composite Solutions Corporation 1820 West Valley Hwy. N Auburn, WA 98001 Park 25 of the Federal Aviation Regulations. (See Type Certification Data Sheet A45NM for the complete certification basis).

Original Product Type Certificate Number: A45NM Make: Dornier Model: 328-100 Description of Type Design Change: Installation of a closet in accordance with NTP, Inc., Master Drawing List Number 134, Revision C, dated September 19, 1994, or later FAA-approved revision.

Limitations and Conditions: Approval of this change in type design applies to the above aircraft model only and should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and FAA Approved Drawing Number 134, Revision C, must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: April 13, 1994 Date Reissued: November 18, 2005 Date of Issuance: September 21, 1994 Date Amended: November 18, 2005 FEDERAL AVIATION By direction ofphe.

(Signature) TOMNIST RATION Acting Manager, Seattle Aircraft Certification Office (Title)