STC ST00145NY-D

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title ST00145NY-D American Airlines, Inc.

3900 N. Mingo Road Engineering Dept., MD 208 Tulsa, Oklahoma 74116 Federal Aviation Regulations.

1. Reconfiguration of the passenger cabin interior in accordance with US Airways Drawing No. 9A25A6682, Rev New, Dated 2006 Nov 21.

1. The instructions for continued Airworthiness are contained in US Airways Engineering Report 06-57, Revision New, Dated 2006 Nov 21 is required with this modification.

2. Cabin Assignment Module must be reprogrammed in accordance with Airbus Vendor Service Bulletin Z270H-23-757.

3. Overhead bins, sidewalls, ceiling panels, and windscreens must be installed in accordance with Airbus Service Bulletin A320-25-1514.

(See Limitations and Conditions continued on Page 3 of 3) Anthony Gallo Acting Manager New York Aircraft Certification Office Airbus A320 October 30, 2015 July 31, 2006 November 24, 2006 A28NM 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 ST00145NY-D

FAA Form 8110-2 (5/14) Page 3 of

3 Date Reissued: October 30, 2015

4. The installer must determine whether this design change is compatible with previously approved modifications.

5. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

----------END---------- ST00145NY-D