STC ST00149NY-D

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title 25 ST00149NY-D American Airlines, Inc.

3900 N. Mingo Road Engineering Dept., MD 208 Tulsa, Oklahoma 74116 Federal Aviation Regulations.

767-200 Series

1. Reconfiguration of the passenger cabin interior in accordance with US Airways Drawing No. 12P25A0219, Rev New, Dated January 23, 2008.

2. FAA accepted Instructions for Continued Airworthiness, Report No 07-101, Revision New, dated November 15, 2007.

1. FAA approved Boeing Service Bulletin 767-53-0206, Revision New, dated December 17, 2007 must be accomplished in conjunction or prior to modification per this STC.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Boeing June 8, 2007 January 23, 2008 A1NM September 17, 2015 September 7, 2010 Raymond Reinhardt Acting Manager, New York Aircraft Certification Office 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

ST00149NY-D 3

FAA Form 8110-2 (5/14) Page 3 of

Date Reissued: September 17, 2015

Certification Basis:

Regulations at the amendment level in TCDS A1NM.

Based on 14 CFR 21.101 (g), applicable provisions of 14 CFR part 26 are included in the certification basis.

For any future CFR part 26 amendments, the holder of this STC must demonstrate compliance with the applicable sections. As of the issuance date of this STC, compliance has been found for the following regulations:

14 CFR 26.11 amdt 26-0, dated 12/10/2007 14 CFR 26.47 amdt 26-1, dated 01/11/2008

----------END---------- ST00149NY-D 3