STC ST00160NY

Supplemental type certificate · American Airlines Inc

Holder
American Airlines Inc · United States
Status
Current · Reissued
Status date
October 30, 2015
Applied
April 5, 2013
Product
Aircraft · Large Airplane
Certification basis
Part 21, Part 25, Part 26
Data sheet
TCDSA46NM

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of Crew Rest Curtains in the forward cabin to provide Class 2 Crew Rest Compartments

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title ST00160NY American Airlines, Inc.

3900 N. Mingo Road Engineering Dept., MD 208 Tulsa, Oklahoma 74116 Federal Aviation Regulations.

1. Installation of Crew Rest Curtains in the forward cabin to provide Class 2 Crew Rest Compartments in accordance with US Airways Master Data List No 33P25A0924, initial release, dated 30 Sept, 2013.

1. FAA accepted Instructions for Continued Airworthiness, Report No. 13-23, Rev A, dated 29 Aug 2013.

2. This STC does not require a revised Electrical Wiring Interconnection System (EWIS) Instruction for Continued Airworthiness.

3. The Installer must determine whether this design change is compatible with previously approved modifications.

4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Anthony Gallo Acting Manager New York Aircraft Certification Office Airbus A330-300 Series October 30, 2015 April 5, 2013 October 3, 2013 A46NM 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 ST00160NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date Reissued: October 30, 2015

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for non-significant changes in FAA Order 8110.48, the certification basis for Airbus Model A330-300 series is as follows:

a. The type certification basis for Airbus Model A330 series airplanes is shown on TCDS A46NM for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, 05 April 2013, is based upon Part 25, as amended by Amendment 25-136 and Part 26. Based on 14 CFR §§

21.115 and 21.101, and the FAA policy for non-significant changes in FAA Order 8110.48, the certification basis for this modification was determined to be:

Regulations at the latest amendment:

25.30l(a)(b)(c), 25.303, 25.601,25.603 (a)(b)(c), 25.605(a)(b), 25.789(a), 25.815, 25.1529, 25.1541 (a)(b)

Regulations at an intermediate amendment None

Regulations at the amendment level in TCDS A46NM

25.305 (a)(b), 25.307 (a), 25.561 (a)(b)(c)(d), 25.611,25.613 (a)(b)(c)(d)(e), 25.625 (a), 25.785 (j)(k), 25.791,

25.803 (a), 25.811 (d), 25.812 (e), 25.813 (a)(b)(c)(d)(f), 25.853 (a)(b), 25.1301 (a)(b)(c)(d), 25.1447 (c)

CFR Part 26

26.4 7 (b) Amdt 26-1 ----------END---------- ST00160NY

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 9

MakeModelData sheet
AirbusA330-301A46NM
AirbusA330-302A46NM
AirbusA330-303A46NM
AirbusA330-321A46NM
AirbusA330-322A46NM
AirbusA330-323A46NM
AirbusA330-341A46NM
AirbusA330-342A46NM
AirbusA330-343A46NM