STC ST00190IB

IMPORT ST00190IB ALAMO ENGINEERING GmbH 82205 GILCHING

GERMANY Part 25 Title 14 Code of Federal Regulations T00003NY Bombardier Inc.

BD-700-1A10 BD-700-1A11

1. Installation of a Satcom Iridium Datalink Unit with FANS 1/A+ capability and removal of the installed Inmarsat Swift 64 satcom system must be in accordance with ALAMO Engineering GmbH Master Document List No. MDL20A14AE-02, Rev. A, dated December 14, 2023, or later EASA approved revisions.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions Continued on Page 3 of 3) February 26, 2024 April 11, 2024 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT ST00190IB 3

IMPORT ST00190IB Date of Issuance: April 11, 2024

Description of Type Design Change (continued):

2. Aircraft is to be maintained in accordance with ALAMO Engineering GmbH Instructions for Continued Airworthiness No. ICA20A14AE-02, Rev. A, dated May 5, 2023, or later EASA accepted revisions.

3. Aircraft is to be operated in accordance with ALAMO Engineering GmbH Flight Manual Supplement No. FMS20A14AE-02, Rev. A, dated May 3, 2023, or later EASA approved revisions.

2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. This STC is applicable to all serial numbers for this Make-Model.

4. Aircraft is to be operated in accordance with "Limitations" section of the Flight Manual Supplement referenced under description of type design change section of this STC.

----------END---------- 3 3