STC ST00191IB

Supplemental type certificate · Stellar Blu Solutions GmbH

Holder
Stellar Blu Solutions GmbH · Germany
Status
Current · Issued
Status date
April 15, 2024
Applied
March 27, 2024
Product
Aircraft · Large Airplane
Certification basis
Part 25
Data sheet
TCDSA28NM
Foreign approvals
EASA 10083965

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of CABANNER Infotainment system, installation of a WiFi system and LCD screen on passenger seats

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

IMPORT ST00191IB STELLAR BLU SOLUTIONS GmbH

DESIGN OFFICES HIGHLIGHT TOWERS MIES-VAN-DER-ROHE-STRASSE 8 // TOWER 1 80807 MUENCHEN

GERMANY Part 25 Title 14 Code of Federal Regulations A28NM Airbus SAS A319-111/-112/-113/-114/-115/-131/-132/ A319-133/-151N/-153N/-171N

1. Installation of CABANNER Infotainment system, installation of a WiFi system and LCD screen on passenger seats, must be in accordance with GDC Engineering GmbH Master Document Register Doc.

No. A319J-MDR-233000, Issue A, dated February 21, 2024, or later EASA approved revisions.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions Continued on Page 3 of 3) March 27, 2024 April 15, 2024 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT ST00191IB 3

IMPORT ST00191IB Date of Issuance: April 15, 2024

Description of Type Design Change (continued):

2. Maintenance and operation must be in accordance with GDC Engineering GmbH Instructions for Continued Airworthiness & Operator Manual Supplement Doc. No.

A319J-ICA-BRX, Revision 01, dated December 8, 2023, or later EASA accepted/ approved revisions.

2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. Installation on aircraft models only that satisfy the configurations and criteria defined in document FCS-233-A319J, Issue 01, dated February 22, 2024, or later revision approved under the EASA system.

----------END---------- 3 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 11

MakeModelData sheet
Airbus SASA319-111A28NM
Airbus SASA319-112A28NM
Airbus SASA319-113A28NM
Airbus SASA319-114A28NM
Airbus SASA319-115A28NM
Airbus SASA319-131A28NM
Airbus SASA319-132A28NM
Airbus SASA319-133A28NM
Airbus SASA319-151NA28NM
Airbus SASA319-153NA28NM
Airbus SASA319-171NA28NM