What it approves
Installation of an executive interior.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA FORM 8110-2(10-68) PAGE 1 of 1 PAGES Number ST00219AT This certificate issued to C.C.2.B., a Delaware limited liability company C/O Timothy H. Hopkins, Esq., Groom & Cave, LLP 1570 The Alameda, Suite 100 San Jose, CA 95216
Part 25 of the Regulations.
Original Product--Type Certificate Number : A20WE Make : Boeing Model : 747SP
Installation of an Executive Interior in accordance with Page Avjet Master Drawing List No. MDL 92-16, Revision “B”, dated April 28, 1993, or later FAA approved revision.
This approval should not be extended to other airplanes of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change effect upon the airworthiness of that airplane. This determination should include consideration of significant changes in weight distribution such as an increase in the fixed disposable weight in the fuselage. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : July 07, 1992
Date of issuance : April 30, 1993 Date reissued : August 08, 2006
Date amended : May 20, 1993
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 747SP Series | A20WE |