What it approves
ICA improvement for Gogo 2KU Demodification
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
ST04561AT Delta Air Lines, Inc.
1775 MH Jackson Service Road Atlanta, GA 30354 25 Title 14 Code of Federal Regulations A16WE Boeing 737-800 Series and 737-900ER Series ICA improvement for Gogo 2KU Demodification in accordance with Delta Air Lines Master Data List 592125-20MDL001 Revision IR, dated March 21, 2023, or later FAA approved revision.
1) The installer must determine whether this design change is compatible with previously approved modifications.
(see continuation Sheet 3) March 3, 2023 May 24, 2023 May 18, 2023 for Christina M. Underwood Manager, East Certification Branch Compliance & Airworthiness Division Aircraft Certification Service 3
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
ST04561AT 3
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:
ST04561AT Limitations and Conditions: (continued)
2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
3) Prior or concurrent accomplishment of STC ST03405NY “Configuration 2” as defined in DE Document 0106-09518-2400 is required.
4) Delta Air Lines Instructions for Continued Airworthiness (ICA) 592125-20-003 Rev.
A, dated March 21, 2023 or later FAA approved revision, is a required part of this STC.
Certification Basis:
Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Boeing Model 737-800 Series and 737-900ER Series airplanes is as follows:
a. The type certification basis for Boeing Model 737-800 Series and 737-900ER Series airplanes is shown on TCDS A16WE for parts not changed or not affected by the change.
b. The certification basis for parts changed or affected by the change since the reference date of application, March 8, 2023, is based upon part 25 as amended by Amendment 25-148. Based on 14CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this modification was determined to be:
Regulations at the latest amendment 25-0 through 25-148: n/a Regulations at an intermediate amendment: n/a Regulations at the amendment level in TCDS A16WE: 14 CFR 25.571(a)(b) Amdt.
25-86; 14CFR 25.1529 Amdt 25-54
14 CFR Part 26 Regulations Based on 14 CFR 21.101(g), applicable provisions of 14 CFR part 26 are included in the certification basis. For any future 14 CFR part 26 amendment, the holder of this STC must demonstrate compliance with the applicable sections. As of the issuance date of this STC, compliance has been found for the regulations (Amdt 26-0 through 26-7): 26.11, 26.47 -------------------------------------------------------END------------------------------------------------------ 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.