STC ST04572NY

FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

Part of .

IMPORT ST04572NY FOKKER SERVICES B.V.

Hoeksteen 40 2132 MS Hoofddorp Netherlands 25 Title 14 Code of Federal Regulations A16WE The Boeing Company 737-300 Series, 737-400 Series

1. Installation of B737 - Antenna Structural Provisions must be in accordance with Fokker Services B.V.

Master Document List Report No. B737-GNSS-MDL-0001, Issue 1, dated December 9, 2020, or later EASA approved revisions.

2. Aircraft is to be maintained in accordance with Fokker Services B.V. Instructions for Continued Airworthiness Report No. B737-GNSS-ICA-S-003, Issue 1, dated December 7, 2020, or later EASA accepted revisions.

1. The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions Continued on Page 3 of 3) 12/11/2020 12/21/2020 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3

FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT ST04572NY 3

FAA Form 8110-2 (10/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

IMPORT ST04572NY Date of Issuance: December 21, 2020

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3. Aircraft is to be maintained in accordance with "Airworthiness Limitations" section of Fokker Services B.V. Instructions for Continued Airworthiness Report No.

B737-GNSS-ICA-S-003, Issue 1, dated December 7, 2020, or later EASA approved revisions.

4. This approval is limited to only the installation of B737 - Antenna Structural Provisions. The FAA has not certified the equipment for which these provisions are intended. You must get additional FAA approval to install this equipment. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.

5. This STC is applicable to all serial numbers for The Boeing Company, Model 737-300 Series and 737-400 Series.

6. As per the ICA Supplement B737-GNSS-ICA-S-003 this STC has a Limit of Validity of 25800 FC. Operation beyond such value is not allowed without prior EASA approval of an updated ICA Supplement.

----------END---------- 3 3