What it approves
Installation of the Ka Band SATCOM Antenna
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
IMPORT ST04576NY Jet Aviation AG Aeschengraben 6 Basel, Switzerland 40515 25 Title 14 Code of Federal Regulations A20WE Boeing 747-300 747-400
1. Installation of the Ka Band SATCOM Antenna in accordance with the following Jet Aviation MDL configurations or later EASA approved revisions:
Configuration 1: KA Band Structural Provisions Only MDL: JBSL-M-00507MDL-01 Issue 5, dated April 15, 2020
(Description of Type Design Change Continued on Page 3 of 4)
1. The installer must determine whether this design change is compatible with previously approved modifications.
(Limitations and Conditions Continued on Page 3 of 4) May 15, 2020 January 14, 2021 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 4
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
IMPORT ST04576NY 4
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:
IMPORT ST04576NY (Date of Issuance: January 14, 2021)
Description of Type Design Change (continued):
Configuration 2: KA Band Antenna Systems Installation MDL: JBSL-M-00508MDL-01 Issue 6, dated April 09, 2020 Configuration 3: (Configuration 1 + Configuration 2) MDL: JBSL-M-00507MDL-02 Issue 6, dated April 15, 2020
2. For Instructions for Continued Airworthiness, refer to the following Jet Aviation ICA documents or later EASA accepted revisions:
Configuration 1: KA Band Structural Provisions Only ICA: JBSL-M-00507ICA-01 Issue 3, dated April XXXXXXXXXXX, 2020 Configuration 2: KA Band Antenna Systems Installation ICA: JBSL-M-00508ICA-01 Issue 6, dated April XXXXXXXXXXX, 2020 Configuration 3: (Configuration 1 + Configuration 2) ICA: Use both above.
3. For Aircraft Flight Manual Supplement, refer to the following Jet Aviation AFM documents or later EASA approved revisions:
JBSL-M-00507AFM-01 Issue 3 dated April 24, 2020 JBSL-M-00508AFM-01 Issue 3 dated April 24, 2020
2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
Certification Basis:
Based on 14 CFR 21.115 and 21.101, and the FAA policy for design changes that are identified as not significant in FAA order 8110.48, the certification basis for the Boeing 747-300 and 747-400 aircraft is as follows:
(Certification Basis Continued on Page 4 of 4) 3 4
FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:
IMPORT ST04576NY Certification Basis: (continued)
a. The type certified basis for parts not changed or not affected by the change is shown on TCDS A20WE.
b. The modification certification basis for parts changed or affected by the change since the reference application date is shown on TCDS A20WE as 14 CFR part 25 as amended by Amendment 25-59 with the following exceptions:
F-01 ELOS For 25.251 Vibe & Buffet Flight Test (ST09379NY-T-F-1, dated Oct 1, 2020)
----------END---------- 4 4
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.