What it approves
Installation of Cabin Interior Modifications
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number: ST04622CH
Part 25 of the Federal Aviation Regulations.
Original Product Type Certificate Number: A21EA-1 Make: MHI RJ Aviation ULC Model: CL-600-2B19 (Regional Jet Series 100 &
440)
Date of Application: April 28, 2023 Date Reissued:
Date of Issuance: September 22, 2023 Date Amended:
Brenda L. Litchfield ODA Administrator Title: Envoy Aerospace, LLC ODA-831240-CE JST Shuttle Holdings, LLC 214 College Park Plaza Johnstown, PA 15904 Installation of Cabin Interior Modifications in accordance with Flying Colours Corporation Master Data List, Doc.
No. MDL0001-BRCJ0200-220407-02, Revision F, dated September 8, 2023, or later FAA-approved revisions.
1) This STC is applicable to only serial number 7934 for this Make-Model
2) The installer must determine whether this design change is compatible with previously approved modifications.
3) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Number: ST04622CH
(Continuation Sheet) Number: ST04622CH Date of Issuance: September 22, 2023 Certification Basis:
Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the MHI RJ Aviation ULC CL-600-2B19 (Regional Jet Series 100 & 440) aircraft is as follows:
a. The type certification basis for the MHI RJ Aviation ULC CL-600-2B19 (Regional Jet Series 100 & 440) aircraft is shown on TCDS A21EA-1 for parts not changed or affected by the change.
b. This certification basis for parts changed or affected by the change since the reference date of application is based upon TCDS A21EA-1. Based on 14 CFR 21.115 and 21.101, and the FAA policy for significant changes in Order 8110.48, the certification basis for this modification was determined to be:
Applicable regulations at the latest amendment 25-0 through 25-62 § 25.301(a)(b)(c) § 25.303 § 25.305(a)(b)(c) § 25.307(a) § 25.365(e)(2)(f)(g) § 25.561(a)(b)(c) § 25.571(a)(b) § 25.601 § 25.603(a)(b)(c) § 25.605(a) § 25.609(a)(b) § 25.611 § 25.613(a)(b)(c) § 25.619(a)(b)(c) § 25.625(a)(b)(c)(d) § 25.785(b)(c)(d)(h)(1)(i) § 25.787(a)(b) § 25.789(a) § 25.791 § 25.803(a) § 25.809(a)(b)(c) § 25.811(a)(b)(c)(d)(e)(1)(2)(f)(1)(2)(g) § 25.812(a)(1)(b)(e) § 25.813(a)(b)(c)(1)(d) § 25.815 § 25.851(a)(1)(2)(3)(4)(5)(6) § 25.1411(a)(b)(d)(f)(g) § 25.1415(a)(b) § 25.1439(a) § 25.1447(a)(c)(1) § 25.1529 § 25.1541(a)(b) § 25.1561(b)(c)
Applicable 14 CFR Part 25 regulations at other amendment levels § 25.853(a)(d) [Amdt 25-116] Applicable 14 CFR Part 26 regulations at the latest amendment 26-0 through 26-1 Based on 14 CFR § 21.101(g), applicable provisions of 14 CFR Part 26 are included in the certification basis. For any future 14 CFR Part 26 amendments, the holder of this STC must demonstrate compliance with the applicable sections. As of the latest amendment date of this STC, compliance has been found for the following regulations:
14 CFR § 26.11(c) [Amdt. No. 26-7]; § 26.47(c) [Amdt. No. 26-7].
-----END-----
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.