What it approves
Camera Installations
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
IMPORT ST04659NY
JET AVIATION AG AESCHENGRABEN 6 4051 BASEL
SWITZERLAND Part 25 Title 14 Code of Federal Regulations A28NM Airbus SAS A319-111/-112/-113/-114/-115/-131/-132/-133/-151N/-153N;
A320-211/-212/-214/-216/-231/-232/-233/-251N/-252N/-253N /-271N/-272N/-273N
1. Camera Installations must be in accordance with Jet Aviation Master Data List BA32023391-001, Rev. I, dated September 2, 2020, or later EASA approved revisions.
2. Aircraft is to be maintained in accordance with Jet Aviation AG Instructions for Continued Airworthiness JBSL-M-01019ICA-01, Issue 3, dated August 27, 2020, and or later EASA accepted revisions.
1. The installer must determine whether this design change is compatible with previously approved modifications.
(See Limitations and Conditions Continued on Page 3 of 3) August 27, 2021 September 13, 2021 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3
IMPORT ST04659NY ST04659NY 3
IMPORT ST04659NY Date of Issuance: September 13, 2021
2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
3. Aircraft is to be operated in accordance with the "Airworthiness Limitations" section of Jet Aviation AG Instructions for Continued Airworthiness referenced in item 2 under description of type design change section of this STC, or later EASA approved revision.
4. This STC is applicable to all serial numbers for this Make-Model.
Certification Basis:
Based on 14 CFR §21.115 and §21.101, and the FAA policy for changes that are not significant in FAA Order 8110.48A, the certification basis for this modification are as follows:
a) The type certification basis for the Airbus A319 and A320 aircraft is as shown on TCDS A28NM for parts not changed or not affected by the change.
b) The type certification basis for the Airbus A319 and A320 aircraft is as shown on TCDS A28NM for parts changed or affected by the change with the following exceptions:
Regulations at the latest amendment 25-0 through 25-146:
25.23, 25.29, 25.301, 25.302, 25.303, 25.305, 25.307, 25.321, 25.365, 25.561, 25.571,
25.581, 25.601, 25.603, 25.605, 25.607, 25.609, 25.611, 25.613, 25.625, 25.629,
25.631, 25.841, 25.899, 25.1301, 25.1309, 25.1419, 25.1519, 25.1529, 25.1541 ----------END---------- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.