STC ST04673NY

Supplemental type certificate · Q.C.M. DESIGN GmbH

Holder
Q.C.M. DESIGN GmbH · Switzerland
Status
Current · Issued
Status date
October 15, 2021
Applied
October 1, 2021
Product
Aircraft · Large Airplane
Certification basis
Part 21, Part 25
Data sheet
TCDST00003NY

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of Rockwell Collins Venue Retrofit

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificate issued to:

IMPORT ST04673NY Q.C.M. DESIGN GmbH EICHHOLZWEG 20-24 3123 BELP

SWITZERLAND .

Title 14 Code of Federal Regulations T00003NY Make: Original Product Type Certificate Number:

Bombardier Inc BD-700-1A10

1. Installation of Rockwell Collins Venue Retrofit must be in accordance with QCM design GmbH Certification Report, BBD7-QCM23-014-M, Rev. 1, dated September 29, 2021, or later EASA approved revisions. Existing CES system components performing audio/video signal selection and distribution, bulkhead displays, Galley Touchscreen display, DVD players, audio speakers and amplifiers will be removed and replaced with new units from Venue system performing same function.

(See Description of Type Design Change Continued on Page 3 of 3) Limitations and Conditions:

1. This STC is applicable to all serial numbers for this Make-Model.

(See Limitations and Conditions Continued on Page 3 of 3)

October 1, 2021 October 15, 2021 Date of Issuance: Date Amended:

Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service

IMPORT ST04673NY

ST04673NY To (Name and address of transferee):

IMPORT ST04673NY Date of Issuance: October 15, 2021

Description of Type Design Change (continued):

2. Maintenance must be in accordance with QCM design GmbH Instructions for Continued Airworthiness BBD7-QCM23-014-M1-ICA, Initial Issue, Rev. 0, dated April 7, 2021, or later EASA accepted revisions.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

----------END----------

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Bombardier Inc.BD-700-1A11T00003NY