What it approves
Installation of Cabin Air Recirculation Filter Cartridge Replacement
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificate issued to:
IMPORT ST04679NY
AEROCONSEIL 3 RUE DIEUDONNE COSTES 31700 BLAGNAC FRANCE .
Title 14 Code of Federal Regulations A28NM Make: Original Product Type Certificate Number:
Airbus SAS A318-111/-112/-121/-122;
A319-111/-112/-113/-114/-115/-131/-132/-133;
A320-211/-212/-214/-216/-231/-232/-233/-251N/-271N;
A321-111/-112/-131/-211/-212/-213/-231/-232/-251N/-253N/-271N/-272N
1. Installation of Cabin Air Recirculation Filter Cartridge Replacement must be in accordance with Aeroconseil Master Data List 0784-01-A-MDL-R03, dated December 8, 2017, or later EASA approved revisions.
2. Maintanence must be in accordance with Aeroconseil Instructions for Continued Airworthiness 0784-01-ICA-R01, dated November 27, 2017, or later EASA accepted revisions.
1. The installer must determine whether this design change is compatible with previously approved modifications.
(See Limitations and Conditions Continued on Page 3 of 3)
September 10, 2021 November 8, 2021 Date of Issuance: Date Amended:
Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service
IMPORT ST04679NY
ST04679NY To (Name and address of transferee):
IMPORT ST04679NY Date of Issuance: November 8, 2021
2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
3. This STC is applicable to all serial numbers for this Make-Model.
Certification Basis:
Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for changes that are not significant in FAA Order 8110.48A, the certification basis for this modification are as follows:
a. The type certification basis for parts not changed or not affected by the change is shown on TCDS A28NM.
b. The type certification basis for parts changed or affected by the change, is as shown on TCDS A28NM, with the following 14 CFR exceptions:
Regulations at the amendment 25-0 through 25-142:
25.561, 25.601, 25.603, 25.853, 25.899, 25.1301, 25.1309, 25.1529, 25.1541
----------END----------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.