What it approves
Cabin Interior Standardization Mods
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificate issued to:
IMPORT ST04686NY WestJet 21 Aerial Place N.E.
Calgary, Alberta Canada T2E 8X7
Original Product A16WE Make:
Title 14 Code of Federal Regulations Type Certificate Number:
BOEING 737-76N, 737-7CT
1. Cabin Interior Standardization Mods are to be done in accordance with PAA Design Group, Modification Data Summary R0105217, Rev. V, Transport Canada Civil Aviation (TCCA) approved January 10, 2005, or later TCCA approved revision.
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
(Limitations and Conditions Continued on Page 3 of 3)
September 9, 2021 Date Reissued:
December 7, 2021
Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service
IMPORT ST04686NY
ST04686NY To (Name and address of transferee):
IMPORT ST04686NY Date of Issuance: December 7, 2021
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. This approval is limited to the following serial numbers: 32404, 28651, 30134, 32581, 32731, 32881, 32883, 33378, 33379, 32753, 32747, 33656, 33657, 29886, 32748, 32749, 32750, 33697, 32751, 32752, 33698, 32757, 32754, 32755, 32756, 32758, 32759, 32760, 32761, 32762, 32763, 33969, 32764, 33970, 32765, 32766, 32767, 32768, and 32769.
----------END----------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.