What it approves
Manufacture of Engine Fan Cowl Doors.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 25 of the Federal Aviation Regulations.
Description of Type Design Change: Manufacture of Engine Fan Cowl Doors in accordance with Aeronca Document No.
TM518, “737 Cowl Door Drawing Control Document”, Revision A, dated February 19, 1998, or later FAA approved revision.
Installation of Engine Fan Cowl Doors in accordance with Aeronca Document No. TM515, “B737 Fan Cowl Installation, Removal, Adjustment and Rigging Instructions”, Revision B, dated November 3, 1997, or later FAA approved revision.
1) Compliance with Aeronca Engineering Report Number ER 1904, “Instructions for Continued Airworthiness and Structural Repair Manual”, Revision B, dated January 29, 1998, or later FAA approved revision is required.
2) The installer must determine whether this design change is compatible with previously approved modifications.
3) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Aeronca, Inc.
2320 Wedekind Drive Middletown, OH 45042 A16WE Make : Boeing Model : 737-300, 737-400, 737-500
Date of application : April 19, 1995
Date of issuance : March 05, 1998
Date reissued : July 22, 2008
( Signature) Gregory J. Michalik, Senior Aerospace Engineer Airframe & Administrative Branch Chicago Aircraft Certification Office
( Title)
Original signed by:
Gregory J. Michalik
FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES
Number
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.