STC ST09476SC

Part 25 of the Federal Aviation Regulations.

Installation of Luminator Aircraft Products Floor Proximity Escape Path Marking Lights in accordance with Luminator Master Data/Drawing List No. 908019, Revision H, dated December 04, 2007, or later FAA approved revision.

The minimum allowable lighting configuration is as follows: At least one light bulb in any light assembly must operate for that assembly to be functional. In first class, each seat must have at least one functional white light assembly.

In coach class, no more than one consecutive white light assembly may be dysfunctional. Where there are red light assemblies, all must be functional.

No more than two bulbs in each flood light assembly and sidewall exit identifier may be dysfunctional. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Luminator Holding L.P.

900 Klein Road Plano, TX 75074 A2NM Make : Boeing Model : 757-200 Series Date of application : November 01, 1996

Date of issuance : April 24, 1998

Date reissued : 8/12/04; 3/12/07; 7/13/12

Date amended : December 13, 1999;

April 9, 2008 Rev. 2

( Signature) S. Frances Cox, Manager, Special Certification Office, Southwest Region

( Title)

FAA Form 8110-2-1(10-69) Page 2 of 2